PU21 | |
PICMG Standards |
PICMG 1.0 CompactPCI PICMG 2.30 RC1.0 PICMG 2.0 D3.0 |
Form Factor | 3U 2-slot |
Input Voltage |
90÷264 VAC |
Input Frequency |
40÷440 Hz |
Input Current |
1,3A @ 90VAC 0,45A @ 264VAC |
Inrush Current |
Inrush current limiting |
Output Current / Voltage |
Dynamic output – 120W in total; 12V/10A max 5V/24A max 3,3V/9,1A (=30W) |
Minimum Load | No required |
Rated Power | Typical 120W |
Ripple | TBD |
Hold-up Time | 20 ms |
Efficiency | TBD |
Output voltage sense |
Yes for 5V output |
N+1 Redundancy |
Three PU20 in parallel mode possible |
Remote ON/OFF |
Yes |
Power Failure Signal |
Available |
Voltage Degrade Signal |
– |
Status LED | Yes |
Earth Leakage | TBD |
Operating Temperature |
-40°C to 70°C |
Storage Temperature |
-50˚C to +85˚C |
Humidity | According DIN EN 60068-2-30 :2006-06 and S-9401 Operating and storage 40% to 95% |
Shock | According DIN EN 50155:2008-03: Shock: 50m/s²; 30ms Function: 2.02m/s²*(2x* 1.01m/s²) 10min/axis Lifetime: 11.44m/s²*(2x* 5.72m/s²) 5h/axis |
Vibration | According DIN EN 50155:2008-03 Category 1 Class B |
Cooling Requirement | TBD |
Certifications | EN 50155 |
MTBF | 600.000 h |
Ordering Information | 17PU21-00 |
Alimentatori Modulari EN50155 AC Power InputGOMA ELETTRONICA2018-03-29T09:44:12+02:00